美國泛美超聲測厚探頭
簡要描述：美國泛美超聲測厚探頭包括：D790 D790-SM D790-SL D790-RL D791 D797 D798-SM D799 D7906 M2017 MTD705及其探頭線等等
產品型號：D790 D790-SM D790-SL D790-RL D791 D797 D798-SM D79- 廠商性質：經銷商
- 更新時間：2024-07-07
- 訪 問 量：1920
簡單介紹
美國泛美超聲測厚探頭包括：D790 D790-SM D790-SL D790-RL D791 D797 D798-SM D799 D
泛美超聲測厚探頭的詳細介紹
泛美超聲測厚探頭 Olympus NDT為用戶提供系列完備、用于腐蝕測厚儀的雙晶片和單晶片探頭。該系列大部分探頭都能與自動探頭識別功能兼容，因而提高了檢測效能。由于備有各種不同頻率、不同大小以及承受溫度特性不同的探頭，因此對于大部分腐蝕探測應用都能提供現成的解決方案。請注意：如需購買TP103證書，需額外付費。
Gage Dual Transducers
| Transducer | Freq. | Tip Diameter | Connector | Range in Steel | | ||||
| | MHz | in. | mm | Type | Location | in | mm | °F | °C |
| D790 | 5.0 | 0.434 | 11 | Potted | Straight | 0.040 - 20 | 1.0 - 508 | -5 to 932 | -20 to 500 |
| D790-SM | 5.0 | 0.434 | 11 | Microdot® | Straight | 0.040 - 20 | 1.0 - 508 | -5 to 932 | -20 to 500 |
| D790-SL | 5.0 | 0.434 | 11 | Lemo® | Straight | 0.040 - 20 | 1.0 - 508 | -5 to 932 | -20 to 500 |
| D790-RL | 5.0 | 0.434 | 11 | Lemo | Rt Angle | 0.040 - 20 | 1.0 - 508 | -5 to 932 | -20 to 500 |
| D791 | 5.0 | 0.434 | 11 | Potted | Rt Angle | 0.040 - 20 | 1.0 - 508 | -5 to 932 | -20 to 500 |
| D791-RM | 5.0 | 0.434 | 11 | Microdot | Rt Angle | 0.040 - 20 | 1.0 - 508 | -5 to 752 | -20 to 400 |
| D792 | 10 | 0.283 | 7.2 | Potted | Straight | 0.020 - 1 | 0.5 - 25 | 32 to 122 | 0 to 50 |
| D793 | 10 | 0.283 | 7.2 | Potted | Rt Angle | 0.020 - 1 | 0.5 - 25 | 32 to 122 | 0 to 50 |
| D794 | 5.0 | 0.283 | 7.2 | Potted | Straight | 0.030 - 2 | 0.75 - 50 | 32 to 122 | 0 to 50 |
| D795 | 5.0 | 0.283 | 7.2 | Potted | Rt Angle | 0.030 - 2 | 0.75 - 50 | 32 to 122 | 0 to 50 |
| D797 | 2.0 | 0.900 | 22.9 | Potted | Rt Angle | 0.150 - 25 | 3.8 - 635 | -5 to 752 | -20 to 400 |
| D797-SM | 2.0 | 0.900 | 22.9 | Microdot | Straight | 0.150 - 25 | 3.8 - 635 | -5 to 752 | -20 to 400 |
| D7226 | 7.5 | 0.350 | 8.9 | Potted | Rt Angle | 0.028 - 4 | 0.71 - 100 | -5 to 300 | -20 to 150 |
| D798-LF | 7.5 | 0.350 | 8.9 | Potted | Rt Angle | 0.028 - 4 | 0.71 - 100 | -5 to 300 | -20 to 150 |
| D798 | 7.5 | 0.283 | 7.2 | Potted | Rt Angle | 0.028 - 4 | 0.71 - 100 | -5 to 300 | -20 to 150 |
| D798-SM | 7.5 | 0.283 | 7.2 | Microdot | Straight | 0.028 - 4 | 0.71 - 100 | -5 to 300 | -20 to 150 |
| D799 | 5.0 | 0.434 | 11 | Potted | Rt Angle | 0.040 - 20 | 1.0 - 508 | -5 to 300 | -20 to 150 |
| MTD705 | 5.0 | 0.200 | 5.1 | Lepra/Con | Rt Angle | 0.040 - 0.75 | 1.0 - 19 | 32 to 122 | 0 to 50 |
泛美超聲測厚探頭Other Thickness Gage Transducers
• For use with
| Transducer | Freq. | Tip Diameter | Transducer Type | Connector | Range in Steel | Temp. Range | |
| ||||||||||
| | | |||||||||||||||||
| | MHz | in. | mm | | Type | Location | in | mm | °F | °C | | | ||||||
| V260-SM | 15 | 0.080 | 2 | Sonopen® | Microdot® | Straight | 0.02 - 0.400 | 0.5 - 10 | 32 to 122 | 0 to 50 | | | ||||||
| V260-RM | 15 | 0.080 | 2 | Sonopen | Microdot | Right Angle | 0.02 - 0.400 | 0.5 - 10 | 32 to 122 | 0 to 50 | | | ||||||
| V260-45 | 15 | 0.080 | 2 | Sonopen | Microdot | 45? Handle | 0.02 - 0.400 | 0.5 - 10 | 32 to 122 | 0 to 50 | | | ||||||
| D7906-SM* | 5.0 | 0.434 | 11 | Thru-Coat Dual | Microdot | Straight | 0.040 - 2.0 | 1.0 - 50 | 32 to 122 | 0 to 50 | | | ||||||
| D7908* | 7.5 | 0.283 | 7.2 | Thru-Coat Dual | Potted | Potted | 0.040 - 1.5 | 0.71 - 37 | 32 to 122 | 0 to 50 | | | ||||||
| M2017 | 20 | 0.250 | 6.35 | Internal Oxide Scale | Microdot | Right Angle | Steel: 0.020 - 0.50 Oxide: 0.010 - 0.050 | Steel: 0.5 - 12 Oxide: 0.25 - 1.25 | 32 to 122 | 0 to 50 | | |||||||
| M2091 | 20 | 0.250 | 6.35 | Replaceable Delay Line Shear Wave | Microdot | Right Angle | Steel: 0.020 - 0.50 Oxide: 0.006 - 0.050 | Steel: 0.5 - 12 Oxide: 0.150 - 1.25 | 32 to 122 | 0 to 50 | | |||||||
| E110-SB† | - | 1.25 | 28.5 | EMAT | BNC | Straight | 0.080 - 5 | 2.0 - 125 | 32 to 176 | 0 to 80 | | |||||||
| | | | | | | | | | | | | | | | | | | |
* Compatible with MG2-XT and MG2-DL
† Adaptor required for E110 （part number 1/2XA/E110）.
泛美超聲測厚探頭Gage Dual Cables
| Cable Part Number | For Use With | Length | Cable Type | Plug Type | | |
| | | feet | meters | | | |
| LCMD-316-5B | D790-SM | 5.0 | 1.5 | Standard | Straight | |
| RLCMD-316-5B | D790-SM | 5.0 | 1.5 | Standard | Rt Angle | |
| LCMD-178-5B SSA | D790-SM | 5.0 | 1.5 | Armored | Straight | |
| RLCMD-178-5B SSA | D790-SM | 5.0 | 1.5 | Armored | Rt Angle | |
| LCLD-316 | D790-RL | 5.0 | 1.5 | Standard | Straight | |
| LCLD-316-5H | D790-SL | 5.0 | 1.5 | Standard | Straight | |
| LCMD-316 | D791-RM | 5.0 | 1.5 | Standard | Straight | |
| LCMD-316-5D | D797-SM | 5.0 | 1.5 | Standard | Straight | |
| LCMD-316-5J | D798-SM | 5.0 | 1.5 | Standard | Straight | |
| LCMD-316 | D7906-SM | 5.0 | 1.5 | Standard | Straight | |
| LCLPD-78-5 | MTD705 | 5.0 | 1.5 | Standard | Straight | |
| LCM-74-4 | V260-SM, V260-RM, V260-45, M2017 | 4.0 | 1.2 | Standard | - | |
| | ||||||
| LCM-188-4 SSA | V260-SM, V260-RM, V260-45, M2017 | 4.0 | 1.2 | Armored | - | |
| | ||||||
| LCB-74-4 | E110-SB | 4.0 | 1.2 | Standard | - | |
其他 相關儀器：鐵素體測量儀，高斯計，張力儀，扭力測量儀，沖擊試驗機，扭轉疲勞試驗機，電子萬能試驗機，彈簧試驗機，金屬電導率儀，人造板試驗機，車輛測試設備
